acrylic packing

acrylic packing is made of reinforced acrylic fiber as the base material and impregnated with polytetrafluoroethylene. With high strength, wear resistance, erosion resistance and other properties, is the ideal substitute for asbestos packing. It is suitable for high line speed and high pressure pumps, valves and kettles as packing seals, and can also be used as seals for marine liquid containers. The company can also provide acrylic fiber and silicone core impregnated PTFE packing, this packing compression performance rebound performance and compensation performance is better, the sealing effect on the old equipment is more obvious.

P5000L --silicone core acrylic packing.the packing has better elasticity.absorbable equipment to sealing equipment.Leakage Reduction.Suitable for old pumps with worn shafts or eccentricity.

Application areas:

> 1.acrylic packing belongs to multi-purpose packing.a wide range of pumps in all walks of life.valve and other parts,

>2.Suitable for removing strong acid.strong alkali and strong oxidizing media,

>3.acrylic packing at medium temperature.high pressure.Especially suitable for high-speed and non-contaminated occasions.

Main technical parameters:

one.temperature: -100 oC ~ 120 oC

II.pressure: 2Mpa (rotary pump)

8Mpa (reciprocating pump)

15Mpa (valve)

three. PHvalue: 2-12

IV.linear velocity: 12M/S (rotary pump)

2M/S (reciprocating pump)

2M/S (valve)

five.available section size: ≥1/8"~≤3"(3X3-75X75mm)

VI.density:1.10 ~ 1.20g/cm& sup3;

Note: (1) The packing can be infiltrated with high temperature lubricant according to needs. Density:1.30-1.40g/cm& sup3;

(2) According to the need to add iron red silicone rubber strip elastomer in the core part of the packing.